TM 9-2320-280-34
18-3. TRANSFER CASE REPAIR (Model 218) (Cont'd)
NOTE
Pilot roller bearings will fall free when removing output shaft.
11.
Remove oil pump (6), rear output shaft (7), and fifteen pilot roller bearings (16). Remove
O-ring (8) from groove on mainshaft (14). Discard O-ring (8).
12.
Remove differential (15) and magnet (9) from front case (1).
13.
Remove front output shaft rear thrust bearing assembly (10) from front output shaft (12). Tag
thrust bearing assembly (10) for assembly.
14.
Remove snapring (11) from driven sprocket (13) and front output shaft (12).
15.
Place hose clamp (18) around mainshaft (14) to hold assembly together.
16.
Lift mainshaft (14) slightly, and remove driven sprocket (13) and drive chain (17) from front
case (1).
18-5
