TM 9-2320-280-34
17 - 5. TRANSMISSION CASE REPAIR (Cont' )
d
6.
Inspect rear case bushing (4) for damage. If damaged, perform steps 7 through 9.
7.
Working from rear of transmission case (3), use bushing remover and installer J21465-8 and driver
handle to remove bushing (4) from transmission case (3). Discard bushing (4).
8.
Working from front of transmission case (3), use driver handle, driver handle adapter J21465-13,
bushing remover and installer J21465-8, and adapter ring J21465-9 to install bushing (4). Place
bushing (4) on remover and installer with lube passage (7) on bushing (4) facing adapter ring. Install
bushing (4) on transmission case (3) until adapter ring bottoms.
9.
Working from rear of transmission case (3), use staking tool to stake bushing (4). Stake marks must
be in bushing groove (6).
17-15
