TM 9-2320-280-34
14-27. AIR-CONDITIONING COMPRESSOR REPAIR (R-12) (Cont'd)
8.
Place puller jaws into rotor pulley (2) around shaft (3).
9.
Insert the bottom lips of the jaws into the internal bearing snapring groove on rotor pulley (2).
Place puller shaft protector between jaws, and seat on shaft (3). Install clutch plate puller on puller
jaws and tighten capscrews finger tight.
10.
Remove rotor pulley (2) from shaft (3).
11.
Using external snapring pliers, remove snapring (1) from seal housing (4) and remove field coil (5).
Discard snapring (1).
CLUTCH PLATE
PULLER
PULLER SHAFT
PROTECTOR
PULLER JAWS
2
1
3
4
5
6
14-126
Change 2
