TM 9-2320-280-34
(MODEL 10530B)
This task covers:
Testing and Adjustment
INITIAL SETUP:
Tools
Manual References
General mechanic's tool kit:
TM 9-2320-280-20
automotive (Appendix G, Item 1)
TM 9-2320-280-24P
Test Equipment
Equipment Condition
24 volt DC power source
Ambulance or arctic heater removed
(Appendix G, Item 130)
(TM 9-2320-280-20).
Graduated beaker, 1.7 oz (50 cc)
General Safety Instructions
(Appendix G, Item 131)
Do not perform this procedure near fire,
Fuel container, 1 gal (3.785 L)
flames, or sparks.
(Appendix G, Item 132)
Do not operate heater in enclosed areas.
Ammeter (50 ampere) (Appendix G, Item 133)
Exhaust gases can kill.
Materials/Parts
Maintenance Level
Nonmetallic tubing, .187 in. (4.7 mm)
Direct support
diameter (Appendix E, Item 258)
Insulation varnish (Appendix B, Item 27)
Fuel oil (Appendix B, Item 16)
Testing and Adjustment
WARNING
Diesel fuel is highly flammable. Do no perform this procedure near
fire, flames, or sparks. Severe injury or death will result.
Do not operate heater in enclosed areas. Exhaust gases can kill.
Make sure work area is well-ventilated and exhaust fumes are
routed away from test area.
NOTE
Make sure heater is placed in its normal operating position in
holding fixture.
Use DF-2 grade diesel fuel for bench testing.
Testing is to be performed in an area of surrounding temperature
of 50F (10C) or higher.
Change 2
