TM 9-2320-280-34
14-11. AMBULANCE HEATER REPAIR (MODEL 10530B) (Cont'd)
CAUTION
The overheat switch is adjusted and sealed at the factory. To
prevent damage, do not bend or twist the switch or change the
setting of the adjustment screw.
17.
Remove two assembled-washer screws (1) and overheat switch (2) from heater body (8).
Discard assembled-washer screws (1).
18.
Loosen nut (4) and remove flame detector switch (3) and washer (5) from heat exchanger fitting (6).
19.
Turn two dzus fasteners (9) and remove cover plate (10) from heater body (8).
20.
Turn igniter (11) counterclockwise and remove from igniter tube (7).
14-56
Change 2
