TM 9-2320-280-34
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Parking brake caliper and rotor removed
automotive (Appendix G, Item 1)
(TM 9-2320-280-20).
Parking brake heat shield removed
Materials/Parts
(TM 9-2320-280-20).
Two locknuts (Appendix E, Item 65)
Maintenance Level
Manual References
Direct support
TM 9-2320-280-20
TM 9-2320-280-24P
a. Removal
NOTE
It may be necessary to lift vehicle and turn rear wheels to rotate
flange for access to capscrews.
1.
Remove two capscrews (7) from mounting bracket (1) and rear differential (6).
2.
Remove two capscrews (4), washers (3), locknuts (2), washers (3), and mounting bracket (1) from
frame crossmember (5). Discard locknuts (2).
b. Installation
1.
Install mounting bracket (1) on frame crossmember (5) with two capscrews (4), washers (3),
locknuts (2), and washers (3). Tighten locknuts (2) to 90 lb-ft (122 Nm).
2.
Install mounting bracket (1) on differential (6) with two capscrews (7). Tighten capscrews (7)
to 110 lb-ft (149 Nm).
3
1
2
3
4
5
7
6
FOLLOW-ON TASKS: Install parking brake caliper and rotor (TM 9-2320-280-20).
Install parking brake heat shield (TM 9-2320-280-20).
9-23
