TM 9-2320-280-34
9-6. GEARED HUB REPAIR (Cont'd)
10.
Remove four capscrews (1), washers (2), drive gear retainer (3), shim gaskets (4), bearing cup (5),
and drive gear (6) from geared hub (8).
11.
Remove retaining washer (7) from inside drive gear (6) or geared hub (8).
12.
Remove spindle seal (9) from geared hub (8). Discard spindle seal (9).
13.
Remove input seal (10) from drive gear retainer (3). Discard input seal (10).
