TM 9-2320-280-34
This task covers:
a. Removal
c. Installation
b. Inspection
INITIAL SETUP:
Applicable Models
Materials/Parts
All vehicles except: M997A2, M1025A2,
Gasket (Appendix E, Item 25)
M1035A2, M1043A2, M1045A2, M1097A2
Manual References
Tools
TM 9-2320-280-24P
General mechanic's tool kit:
Maintenance Level
automotive (Appendix G, Item 1)
Direct support
CAUTION
Area around governor must be thoroughly cleaned prior to
removal to prevent contamination.
a. Removal
1.
Remove four capscrews (5), vent line clamp (4), governor cover (3), and gasket (2) from
transmission (1). Discard gasket (2).
2.
Remove governor (6) from transmission (1).
b. Inspection
Inspect governor (para. 17-12).
c. Installation
1.
Install govenor (6) into transmission(1).
2.
Install gasket (2), governor cover (3), and vent line clamp (4) on transmission (1) with four
capscrews (5). Tighten capscrews (5) to 17 lb-ft (23 Nm).
Change 2
