TM 9-2320-280-34
6-9. BODY WIRING HARNESS REPLACEMENT (Cont'd)
10.
Connect harness connector (5) to protective control box (3).
11.
Connect harness connector (7) to turn signal flasher module (6).
12.
Connect harness connector (12) to turn signal control (11).
13.
Connect harness leads 75A (13) and 75B (14) to stoplight switch (15).
14.
Connect harness leads 57D (17) and 71C (16) to windshield washer motor leads 71 (2) and 57 (1).
15.
Install harness (4) on steering column support (10) with clamp (9) and screw (8).
16.
Connect harness leads 17A (21), 18A (22), and 16A (23) to dimmer switch (20).
17.
Install shield (19) on dimmer switch (20) with three assembled-washer screws (18).
18.
Install harness (4) on body (28) with three clamps (25), capscrews (24), washers (26), and locknuts
(27).
19.
Connect harness leads 27C (33), 27D (36), 27K (37), and 71A (38) to two circuit breakers (39).
20.
Connect harness lead 25A (29) to horn switch (41).
21.
Apply antiseize compound to harness ground lead 57C (31) and install on steering column (40) with
capscrew (30) and locknut (32).
22.
Install harness (4) on steering column support (10) with two clamps (34) and screws (35).
6-102
Change 2