TM 9-2320-280-34
6-3.3. 100 AMPERE DUAL VOLTAGE ALTERNATOR (12447110) TESTING AND REPAIR (Cont'd)
18.
Install core and shaft assembly (5) on rear rotor (24) with six nuts (25). Tighten nuts (25)
to 45 lb-in. (5 Nm).
NOTE
Align scribe marks on end housing and stator shell.
19.
Install end housing (9) on core and shaft assembly (5) and rear bearing (6). Tap lightly with a soft-
faced mallet.
20.
Apply silicone compound to studs (16) on stator (15).
21.
Install end housing (9) on stator (15) with nine locknuts (14). Tighten locknuts (14)
to 18 lb-in. (2 Nm).
22.
Install cover plate (20) on front housing (1) with three lockwashers (22) and screws (21).
23.
Install bearing bushing (10) on core and shaft assembly (5).
24.
Install fan (11) on core and shaft assembly (5) with washer (12) and locknut (13). Tighten
locknut (13) to 50 lb-ft (68 Nm).
FOLLOW-ON TASKS: Install voltage regulator (TM 9-2320-280-20).
Install alternator (TM 9-2320-280-20).
6-19
