TM 9-2320-280-34
3-23. ENGINE INSTALLATION (6.2 L AND 6.5 L [DETUNED]) (Cont'd)
NOTE
Steps 21 and 22 apply to M996, M996A1, M997, and M997A1
vehicles only. Step 22 applies to M997 and M997A1 vehicles only.
It may be necessary to remove lockwasher and nut from starter
terminal in order to install 200 amp cable.
21.
Install 200 amp cable (11) to starter (1) with clamp (10), bolt (9), and tiedown strap (8).
22.
Install 200 amp cable clamp (6) and engine wiring harness clamp (5) to oil pan bracket (2) with
screw (3) and assembled locknut (7).
23.
Install air compressor harness clamp (4) to screw (3) on oil pan bracket (2) with assembled
locknut (7).
M997, M997A1
3
2
1
3
11
5
4
10
6
9
7
8
3-88
Change 2
