TM 9-2320-280-34
3-22. ENGINE REMOVAL (6.2 L) (Cont' )
d
20.
Loosen clamp (1) and disconnect radiator inlet hose (2) from engine.
21.
Loosen clamp (5) and disconnect surge tank-to-radiator vent hose (4) from adapter (6).
22.
Loosen clamp (15) and disconnect control valve hose (14) from bulkhead adapter (16).
23.
Disconnect fan drive hose (17) from fan drive (18).
24.
Loosen clamp (9) and disconnect lower radiator front hose (10) from radiator (3).
25.
Remove locknut (25), washer (26), capscrew (31), washer (30), large washer (29), and lower
mount (27), from frame bracket (28). Discard locknut (25).
26.
Remove four locknuts (11), washers (12) capscrews (13), and two brackets (8) from airlift
bracket (7). Discard locknuts (11).
WARNING
Do not drain engine oil when engine is hot. Severe injury to per-
sonnel will result.
CAUTION
Cover or plug all hoses and immediately after disconnection to
prevent contamination.
NOTE
Have drainage container ready to catch oil.
27.
Disconnect engine oil cooler supply and return lines (22) from engine oil cooler ports (21).
28.
Loosen two hose clamps (19) and disconnect transmission oil cooler line connector hoses (23) from
transmission oil cooler ports (20).
29.
Lift up radiator (3) and shroud and oil cooler assembly (24) and remove from vehicle.
3-52
