TM 9-2320-266-34
(5) Install the overheat switch.
(1) Disconnect the electrical wire.
(6) Install the thermostat control switch, and tighten
(2) Remove the attaching screw.
the attaching screws.
(3) Remove the switch.
(7) Connect the electrical wires to the switch.
b. Installation.
(8) Connect the control cable to the switch.
(1) Position the switch, and install the attaching
(9) Install the combustion air tube
screw.
(2) Connect the electrical wire.
23-10. Upset Switch.
a. Removal
23-3/23-4 (blank)
Change 2
