TM11-7440-284-14
4-91. OUT OF VEHICLE CONFIGURATION. (CONT)
ACTION
REMARKS
ITEM
LOCATION
REINSTALLATION FOR MOBILE OPERATION (CONT)
Remove.
5.
Field
operation
Quick release
pin (1)
site
Push table leg up until pin hole (3) and pin
Table leg (2), pin
6.
hole (4) are alined.
hole (3) and pin
hole (4)
Install.
7.
Quick release
pin (1)
Remove.
8.
Quick release
pin (5)
Raise.
Table leg (2)
9.
When raised, table leg hole and hole
in support bracket must be alined.
Install.
10.
Quick release pin
There are four table legs. Steps 5
(5) and table leg
hole (6)
thru 10 are typical for all four
table legs.
Do steps 5 through 10 again.
Table legs (7)
11.
Install, see paragraph 4-27.
Electronic equip-
12. Vehicle bed, top
ment table (8)
of radio mount
NOTE
To install tacfire components and power cabling, see
TM 11-7440-251-10 and TM 11-7440-253-10-1.
Using pliers, install.
Lockwasher (9),
Behind power dis-
13.
tribution box
ground strap (10),
Iockwasher (11)
and brass wing-
nut (12)
4-186
