TM 11-7440-284-14
4-91. OUT OF VEHICLE CONFIGURATION. (CONT)
ACTION
REMARKS
ITEM
LOCATION
REINSTALLATION FOR MOBILE OPERATION
NOTE
For antenna and power cabling disconnections, see SB 11-131.
For tacfire component removals, see TM 11-7440-251-10 and
TM 11-7440-253-10-1.
Using pliers, remove.
Wingnut (1),
1. Stud behind power
Hardware will be used later in
Iockwasher (2), 10-
distribution box
this task.
foot ground strap
(3) and lock-
washer (4)
Using flat-tip screwdriver, remove.
Clamp screw (5)
2. Field operation
site.
and 10-foot ground
strap (3)
3.
Using flat-tip screwdriver, remove.
Clamp screw (6)
and ground rod
clamp (7)
NOTE
The dirt that ground rod sits in must be soaked with water to
make removal of ground rod possible. Ground rod comes in
three sections. Disconnect top two sections before removing
third section.
Ground rod (8)
Using 8-lb sledge hammer, remove.
4.
NOTE
Place ground rod clamp, clamp screws, 10-foot ground strap
and ground rod sections in canvas bag. Store under radio
mount.
4-184
