TM 11-7440-284-14
4-70. REMOVING ADAPTER ASSEMBLIES.
This task covers:
Removal
INITIAL SETUP
Personnel Required
Tools
Two mechanics
1/2-inch box wrench
(2 required)
Equipment Condition
Materials/Parts
Submount assembly removed,
see paragraph 4-69.
None
ACTION
REMARKS
ITEM
LOCATION
NOTE
A helper will be needed outside carrier.
Using two 1/2-inch box wrenches, remove.
1. Carrier walls
Screw (1) flat
There are two screws. Step 1 is
washer (2), flat
typical for both screws.
washer (3) and
nut (4)
Do step 1 again.
2.
Screw (5)
Remove.
Adapter (6)
3.
There are eight adapters. Step 3
is typical for all eight adapters.
Do steps 1, 2 and 3 again.
Adapter (7)
4.
See paragraph 4-22 for installation.
4-136
