TM 11-7440-284-14
4-47. INSTALLING FIRE EXTINGUISHER MOUNTING BRACKET.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
7/16-inch box wrench
(2 required)
Equipment Condition
Materials/Parts
Battery box installed.
1/4-20 x 1/2 inch long screw
(4 required)
1/4-20 nut (4 required)
1/4-inch flat washer (4 required)
1/4-inch Iockwasher (4 required)
Fire extinguisher mounting bracket
ACTION
ITEM
REMARKS
LOCATION
Place and aline holes.
1. Battery box
Battery box
cover
cover (1) and
Strap on bracket must face curbside
fire extinguisher
of vehicle.
bracket (2)
2.
Install,
handtighten.
Screw (3), flat
There are four screws. Step 2 is
washer (4),
Iockwasher (5)
typical for all four screws.
and nut (6)
Do step 2 again.
3.
Holes (7)
4.
Screws (3) and
Using two 7/16-inch box wrenches, tighten.
nuts (6)
4-96
