TM 11-7440-284-14
4-46. INSTALLING BATTERIES AND HOLDDOWN.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
Adjustable pliers
Equipment Condition
Materials/Parts
Battery box installed.
45 amp H.R. lead-acid battery
(2 required)
Threaded J-bolt (4 required)
Battery holddown
Nut (4 required)
Flat washer (4 required)
ACTION
REMARKS
ITEM
LOCATION
WARNING
When using battery acid, be sure to work in a well ventilated
area, use proper eye protection, and wear rubber gloves.
Should you come in contact with battery acid, be sure to wash
the affected area with cool water, then seek immediate
medical aid.
CAUTION
Upon receipt of lead-acid batteries, batteries must be filled
with sulfuric acid and charged before they can be installed.
See decal on inside of battery box for correct polarity for
positioning of batteries.
Place batteries in battery box.
Batteries (1) and
1. Inside battery box
battery box (2)
4-94
