TM 11-7440-284-14
4-44. INSTALLING GENERATOR.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
Two mechanics
Adjustable pliers
Equipment Condition
Materials/Parts
Nut plates installed in floor base
Generator
at depot and floor base
Generator mounting strip
installed.
(2 required)
ACTION
REMARKS
ITEM
LOCATION
NOTE
A helper will be needed to lift and position battery box
on carrier bed floor.
Place generator on floor base between nut
Generator (1)
1. Roadside of
plate holes.
carrier bed
fIoor
Install, handtighten.
Roadside mounting
2. Generator road-
strip (2) and
side rail
wingnut (3)
Do step 2 again.
Wingnut hole (4)
3.
Do steps 2 and 3 again.
Curbside mounting
4. Generator curb-
strip (5)
side rail
Using pliers, tighten.
Wingnuts (3) and
5.
wingnut (6)
4-90
