TM 11-7440-284-14
4-43. INSTALLING FUEL CAN AND BRACKET.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
1/2-inch box wrench
Materials/Parts
Equipment Condition
Floor base installed.
Fuel can bracket
5/16-18 x 1 inch long screw
(4 required)
5/16-inch flat washer
(4 required)
5/16-inch Iockwasher
(4 required)
ACTION
ITEM
REMARKS
LOCATION
Aline.
1. Rear curbside
Fuel can bracket
Position high side of bracket to
position of
(1) and floor
floor base
base holes (2)
curbside.
Install, handtighten.
Screw (3), lock-
2.
washer (4) and
There are four screws. Step 1 is
flat washer (5)
typical for all four screws.
Do step 2 again.
Screw holes (6)
3.
4.
Screws (3)
Using 1/2-inch box wrench, tighten.
Fuel can (7) and
5. Fuel can
Place fuel can in bracket and secure with
bracket
strap (8)
strap.
4-88
