TM 11-7440-284-14
4-36. INSTALLING TACFIRE COMPONENTS.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
Two mechanics
Flat-tip screwdriver
Cross-tip screwdriver
Equipment Condition
Materials/Parts
Tacfire racks installed.
Message entry group
Electronic line printer
Key generator
5/16-24 x 1/2 inch long flat
head screw (4 required)
ACTION
REMARKS
ITEM
LOCATION
NOTE
Carefully slide tacfire components into place engaging shear
pins on rear of racks. This is typical for steps 1 and 2.
Install.
Electronic line
1. Electronic line
printer (1)
printer rack
NOTE
ELP is mounted to a sliding tray. See paragraph 4-32 for
installation of tray.
Install.
Message entry
2. Message entry
group (2)
group rack
Place key generator on tray and aline holes.
Key generator (3)
3. Key generator
and KG tray (4)
rack
Install,handtighten.
Screw (5)
4.
There are four screws. Step 4 is
typical for all four screws.
4-74
