TM 11-7440-284-14
4-35. INSTALLING RADIO MOUNTING BASES.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
1/2-inch box wrench
Equipment Condition
Materials/Parts
Power cables installed on
5/16-18 hex nuts (14 required)
mounting bases.
5/16-inch ET Iockwashers
(14 required)
ACTION
REMARKS
ITEM
LOCATION
NOTE
Install radio mounting bases with latches facing out.
Place on studs.
Radio mounting
1. Roadside position
base (1) and
of radio mount
studs (2)
Using 1/2-inch box wrench, install.
Nut (3) and ET
2.
There are five nuts. Step 2 is
Iockwasher (4)
typical for all five nuts.
Do step 2 again.
Nuts (5) and ET
3.
Iockwashers (6)
Place on to studs.
4. Curbside position
Radio mounting
base (7) and
of radio mount
studs (8)
Using 1/2-inch box wrench, install.
Nut (9) and ET
5.
There are five nuts. Step 5 is
Iockwasher (10)
typical for all five nuts.
4-72
