TM 11-7440-284-14
4-32. INSTALLING ELECTRONIC LINE PRINTER SLIDING TRAY.
This task covers:
Installation
INITIAL SETUP
Tools
Personnel Required
9/16-inch box wrench
One mechanic
Materials/Parts
Equipment Condition
ELP sliding tray
ELP rack installed.
3/8-24 x 7/8 inch long hex head
screw (4 required)
ACTION
LOCATION
ITEM
REMARKS
1. Inside ELP rack
ELP tray (1) and
Place tray inside rack and aline holes.
ELP rack (2)
2.
Screw (3)
Install,
handtighten.
There are four screws. Step 2 is
typical for all four screws.
3.
Screws (4)
Do step 2 again.
Screws (3)
Using 9/16-inch box wrench, tighten.
4-66/(4-67 blank)
