TM 11-7440-284-14
4-13. INSTALLING CANVAS TIE-DOWN HOOKS ON FRONT ANTENNA MOUNTING BRACKETS.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
1/2-inch box wrench
(2 required)
Equipment Condition
Materials/Parts
Tie-down hooks removed from
carrier.
Antenna brackets (2 required)
Tie-down hooks (4 required)
5/16-24 x 1 inch long hex head
screws (8 required)
5/16-24 lock-hex nut
(8 required)
ACTION
REMARKS
ITEM
LOCATION
Place and aline holes.
Tie-down hook (1)
1. Curbside antenna
and bracket (2)
bracket
Using two 1/2-inch box wrenches, install.
Screw (3) and
2.
There are two screws. Step 1 is
locknut (4)
typical for both screws.
Do step 2 again.
Hole (5)
3.
There are two tie-down hooks. Steps 1, 2
and 3 are typical for both hooks.
Tie-down hook (1)
4.
Do steps 1, 2 and 3 again.
There are two front antenna brackets.
Steps 1 through 4 are typical for both
brackets.
Tie-down hook (1)
s. Roadside antenna
Do steps 1 through 4 for second bracket.
and tie-down
bracket
hook (6)
4-20
