TM 11-7440-284-14
4-14. INSTALLING FRONT ANTENNA MOUNTING BRACKETS.
This task covers:
Installation
INITIAL SETUP
Materials/Parts (Cont)
Tools
Antenna mounting brackets
7/16-inch box wrench
(2 required)
(2 required)
Personnel Required
Materials/Parts
Two mechanics
1/4-28 x 3 inch long hex head
screws (32 required)
Equipment Condition
1/4-inch flat washer
(64 required)
Mounting holes drilled and canvas
1/4-28 self-locking nut
tie-downs installed.
(32 required)
ACTION
REMARKS
ITEM
LOCATION
NOTE
A helper will be needed outside carrier.
Place and aline holes.
Bracket (1) and
1. Outside carrier,
forward curbside
carrier wall (2)
wall
Install, handtighten.
2.
Screw (3), flat
washer (4), flat
There are 16 screws. Step 2 is
washer (5) and
typical for all 16 screws.
nut (6)
Do step 2 again.
Holes (7)
3.
Using two 7/16 inch box wrenches, tighten.
Screws (3)
4.
There are two front antenna brackets.
Steps 1 through 4 are typical for both
brackets.
Do steps 1 through 4 again.
Bracket (1)
5. Outside carrier,
forward roadside
wall
4-22
