11-3. WARM AIR HEATER REPAIR (Cont)

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
900

TM 9-2320-289-34 11-3. WARM AIR HEATER REPAIR (Con’t), 7 . Install hatch cover (12) and secure fasteners. Connect igniter ground lead to hatch cover. 8. Thread blower lead through hole in heater housing (3), Install blower assembly (1) into blower housing and slide slots under 4 screws (18). Tighten screws. 9. Install overheat switch (15) and secure with screws. 10. Install flame detector switch (17) into heat exchanger housing with nut and sleeve. Position adjuster nut (16) above overheat switch. 11. Adjust flame detector switch (17) . (See FLAME DETECTOR SWITCH ADJUSTMENT) TA50373 11-16

Privacy Statement
Press Release
Contact