TM 9-2320-289-34
11-2.
ENGINE COOLANT HEATER REPAIR (Con’t).
NOTE
“O” ring (30) may have been removed with cam ring (31).
18.
Remove adapter (35) and “O“ ring (30). Remove seal (41), washer (40), and spring (39).
Discard “O“ ring and seal.
19.
Remove 4 screws (38) and air inlet (37) from burner assembly (23). Remove motor (24) and
air inlet from burner assembly,
20.
Loosen setscrew from fan (36) and remove fan and air inlet plate.
21.
Remove 2 screws from air inlet (37) and remove air inlet from motor (24).
22.
Remove 2 brush caps (42) from side of motor (24) and remove brush and spring assemblies.
2
3 .
Remove 2 screws, vaporizer retainer
(43), and vaporizer (44) from burner
assembly (23).
TA50364
11-5
