TM 9-2320-289-34
10-11. CARGO BODY PICKUP BOX MAINTENANCE (Con’t).
1.
2 .
3 .
4 .
5 .
6 .
7 .
8 .
9 .
10
11
12.
Install body side panel (11) with 6 bolts (10) to floor panel (18),
Install side panel shield (22) with 4 bolts (21).
Install wheel house panel (19) with 6 bolts (24) to floor panel (18).
Assemble wheel house panel (19) with 8 bolts (12) to body side panel (11).
Install body side panel brace (30) with bolt (31 ) to body side panel (11).
Assemble wheel house panel (19) with 4 bolts (20) and 3 nuts (23) to floor panel (18).
Install 2 plugs (8) to body side panel (11).
Spread body side panels (11) and position front panel (6). Install front panel with 10 bolts (9) to
floor panel.
Assemble body side panel (11) with 4 bolts (7) to front of front panel (6). If front panel was
removed, install 4 bolts on front of other body side panel.
Temporarily install endgate for alinement purposes. Install rear floor sill (15) with 4 bolts (17) to
body side panel (11 ). Attach body side panel to rear stake pocket (13) by applying two 0.5 in,
(1 2.7 mm) minimum welds (16) in accordance with TM 9-237.
Remove endgate. Attach rear stake pocket (13) to rear floor sill (15) by applying two 1.0 in,
(25.4 mm) minimum welds (14) in accordance with TM 9-237.
Apply an even bead of sealing compound to all floor panel (18) seams,
d .
INSTALLATION
1 .
Attach suitable lifting device to each corner of pickup box. Position pickup box on frame (25).
2 .
For M1028, M1028A1, M1028A2, and M1028A3, install 8 spacers (27) in frame (25). Install 8
square neck bolts (26) with washers (28) and nuts (29). Tighten nuts to 50 Ib.-ft. (68 N.m).
10-42.4
Change 2
