10-2. RADIATOR SUPPORT ASSEMBLY REPLACEMENT

CHAPTER 10 BODY AND ACCESSORIES MAINTENANCE

10-2. RADIATOR SUPPORT ASSEMBLY REPLACEMENT (Cont) - TM-9-2320-289-34_787

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
769

TM 9-2320-289-34 10-2. RADIATOR SUPPORT ASSEMBLY REPLACEMENT. This task covers: a . R e m o v a l b. Installation INITIAL SETUP: Equipment Condition Tools/Test Equipment l l l l l l l l l l l l Cooling system drained, l Torque wrench (See TM 9-2320-289-20) Coolant recovery reservoir and upper Personnel Required mounting bracket removed. l MOS 63W (2) (See TM 9-2320-289-20) Radiator removed. (See TM 9-2320-289-20) General Safety Instructions Front battery hold-down bracket removed, • Use caution when handling sheet (See TM 9-2320-289-20) metal. Hood latch removed. (See TM 9-2320-289-20) Headlight assemblies removed. (See TM 9-2320-289-20) Parking lights removed. (See TM 9-2320-289-20) Radiator grille and front end panel molding removed, (See TM 9-2320-289-20) Blackout drive light and mounting bracket removed. (See TM 9-2320-289-20) Blackout marker lights disconnected. (See TM 9-2320-289-20) Slave receptacle removed. (See TM 9-2320-289-20) Horn removed, (See TM 9-2320-289-20) a. REMOVAL WARNING Use caution when handling sheet metal. Sheet metal has numerous sharp edges and splinters. Failure to follow this caution may result in injury to personnel. NOTE If removing front end panel (4) and support (5), perform step 1. 1 . Remove 3 bolts (2) securing front end panel (4) and support (5) to radiator support assembly (1), Remove 4 bolts (3) securing front end panel to 2 fenders. Remove front end panel and support. 1 0 -2

Privacy Statement
Press Release
Contact