TM 9-2320-289-34
8-5.
POWER STEERING PUMP REPAIR (Con’t).
9 .
Install magnet (2) into pump housing (1). Lubricate new “O” rings (4, 5, 6, and 15) with
hydraulic fluid and install. Install pump reservoir assembly (7) onto pump housing (1). Install
stud (11) and bolt (9) into assembly finger tight.
10.
Install spring (14) and control valve (13) assembly with flat end of control valve facing outward.
Install nut and fitting assembly (10) with new “ O“ ring (12) in top groove. Tighten to 35 Ib.-ft.
(47 N.m). Tighten stud (11) and bolt (9) to 25 Ib.-ft. (34 N.m). Install reservoir cap (8).
FOLLOW-ON TASKS:
l Install power steering pump pulley, bracket, and pump. (See TM 9-2320-289-20
TA50505
8-38
