TM 9-2320-289-34
6-15.1. REAR AXLE DIFFERENTIAL MAINTENANCE (M1028A2) (Con’t).
6 .
7 .
WARNING
Tightly hold differential case (8) assembly together to absorb spring
pressure as last differential case bolts (19) are removed. Failure to follow
this warning may result in injury to personnel or damage to differential case
assembly components.
Scribe a line on differential case (8) assembly halves. Remove 8 differential case bolts (19) and
separate differential case assembly halves.
From 1 differential case (8) half, remove side gear (14), retainer (15), spring (1 6), driven clutch
(17), and spider assembly (18). From other differential case half, remove driven clutch, spring,
retainer, and side gear.
c.
CLEANING AND INSPECTION
WARNING
6-103.4
Dry cleaning solvent P-D-680 is toxic and flammable. Always wear
protective goggles and gloves and use only in a well-ventilated area.
Avoid contact with skin, eyes, and clothes and DO NOT breathe vapors.
DO NOT use near open flame or excessive heat. The solvent’s flash point
is 100°F-138° F (38°C-59°C). If you become dizzy while using cleaning
solvent, immediately get fresh air and medical help. If solvent contacts
eyes, immediately wash your eyes with water and get medical aid.
Compressed air used for cleaning purposes should never exceed 30 psi
(207 kPa).
equipment
may result
Change 1
Use only effective chip guarding and personnel protective
(goggles/shield, gloves, etc.). Failure to follow this warning
in serious injury to personnel.
