TM 9-2320-289-34
6-9.
FRONT AXLE DRIVE PINION AND BEARINGS MAINTENANCE (ALL EXCEPT
M1009) (Con’t).
8 .
Install new shim (6), front pinion bearing (8), and new slinger (17) on drive pinion (5) shaft.
9 .
If removed, install new deflector (15) to flange (2). Install flange, washer (1 6), and flange nut
(4). Using flange. holder and flange remover, tighten flange nut to pull flange onto drive pinion
(5) and to fully seat front pinion bearing (8). Tighten flange nut to 255 Ib.-ft, (346 N.m).
Remove flange holder and flange remover.
TA50557
6-65
