TM 9-2320-289-34
5-21.
TRANSFER CASE MAINTENANCE (ALL EXCEPT M1028A1 AND M1031)
(Con’t).
NOTE
Lockplate (83) must be installed with raised areas around bolt holes
against front case (29).
8 .
Coat front case (29) and Iockplate (83) surfaces around bolt holes with anaerobic sealant.
Position Iockplate in front case and aline bolt holes. Coat 6 bolts (80) with gasket sealing
compound and install. Tighten bolts to 30 Ib.-ft. (41 N.m).
9 .
Install range sector (70) with shaft through front case (29). Install new oil seal (81 ) and seal
retainer (82). Install operating lever (79) on range sector shaft with washer and new locknut
(78). Tighten locknut to 20 Ib.-ft. (27 N.m).
Install control rod (23) to operating lever with
washer and new cotter pin.
7A513322
5-148
