TM 9-2320-289-34
4-14.
DIRECTIONAL SIGNAL SWITCH REPLACEMENT (Con’t).
6 .
Remove switch harness (18) protector. Disconnect connector (17) from instrument panel
wiring harness (16) and unsnap from steering column (4),
7.
Attach guide wire securely to connector (17). Pull directional signal switch (6) with switch
harness (18) and guide wire through steering column (4) until connector is out of steering
column, Disconnect guide wire and leave in place for installation.
b.
INSTALLATION
1.
Attach guide wire securely to connector (17), Pull guide wire with switch harness (18) through
steering column (4) until connector is out of steering column. Disconnect and remove guide
wire,
2.
Snap connector (17) onto steering column (4) and connect to instrument panel wiring harness
(16). Install switch harness (18) protector.
TA50861
4-96
