TM 9-2320-280-34
22-10. AMBULANCE EXTERIOR BODY REPAIR (Cont'd)
1.
Remove door weatherstrip (TM 9-2320-280-20).
2.
Scribe two lines (14) centered over fifteen rivets (8) and (12) on rear comer roof panel (7) and body
panels (10). Extend scribed lines (14) a minimum of 1.00-in. (25.4 mm) onto body panels (10).
3.
Using a 0.125-in. (3.175 mm) drill, remove three rivets (12) from rear comer roof panel (7) and body
panels (10).
4.
Using a 0.187-in. (4.75 mm) drill, remove twelve rivets (8) from rear corner roof panel (7) and body
panels (10). Remove rear comer roof panel (7).
5.
Remove adhesive residue and clean body panels (10). Do not remove scribed lines (14) marked in
step 2.
6.
Install rear comer roof panel (7) on body panels (10) and transfer scribed lin s (14) marked in step 2.
e
Remove rear corner roof panel (7).
7.
Using scribed lines (14) marked in step 6, drill three 0.125-in. diameter holes (13) in rear comer roof
panel (7).
8.
Using scribed lines (14) marked in step 6, drill eleven 0.187-in. diameter holes (15) in rear corner
roof panel (7).
9.
Apply approximately 0.125-in. (3.175 mm) thickness of adhesive sealant to rear corner roof panel (7)
and body panels (10).
10.
Install rear comer roof panel (7) on body panels (10) with t ree rivets (11) and twelve rivets (9).
h
11.
Spot paint rear comer roof panel (1) and body panels (10) (TM 43-0139).
12.
Apply wicking sealant to twelve rivets (9).
13.
Install door weatherstrip (TM 9-2320-280-20).
22-35
