TM 9-2320-280-34
3-23. ENGINE INSTALLATION (6.2 L AND 6.5 L [DETUNED]) (Cont'd)
119.
Position CDR valve (12) and bracket (10) over two intake manifold studs (3) and valve cover studs (6).
Secure bracket (10) on intake manifold (2) with two nuts (14). Tighten nuts (14) to 15 lb-ft (20 Nm).
120.
Secure bracket (10) on valve cover (13) with two nuts (11). Tighten nuts (11) to 10 lb-ft (14 Nm).
121.
122.
Install heater control cable clamp (1) to CDR valve (12) and bracket (10) with washer (16) and
screw (15). Tighten screw (15) to 15 lb-ft (20 Nm).
123.
Connect CDR valve oil fill tube hose (9) to oil fill tube (8) with clamp (7).
124.
Connect CDR valve intake manifold hose (5) to intake manifold (2) with clamp (4).
3-104
Change 2
