TM 11-7440-284-14
4-86. REMOVING SLEDGE HAMMER AND MOUNTING BRACKETS.
This task covers:
Removal
INITIAL SETUP
Personnel Required
Tools
One mechanic
7/16-inch box wrench
Equipment Condition
Materials/Parts
Sledge hammer and mounting
None
brackets in place.
ACTION
REMARKS
ITEM
LOCATION
Remove.
1. Top of floor base
Wingnuts (1)
Remove.
2.
Sledge hammer
bracket cover (2)
Remove.
3.
Sledge hammer (3)
Using 7/16-inch box wrench, remove.
Screw (4), lock-
4.
washer (5) and
flat washer (6)
Remove.
Spring clip (7)
5.
and spacer (8)
Using 7/16-inch box wrench, remove.
Screw (9), lock-
6.
There are two screws. Step 6 is
washer (10) and
typical for both screws.
flat washer (11)
Do step 6 again.
Screw (12)
7.
Remove.
Bracket (13) and
8.
spacer (14)
See paragraph 4-40 for installation.
Sledge hammer and
9.
mounting bracket
4-168
