TM
11-7440-284-14
4-83. REMOVING/INSTALLING BATTERY HOLDDOWN.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
Adjustable pliers
Equipment Condition
Materials/Parts
Battery cables disconnected.
None
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Using pliers, remove.
Nut (1), flat
1. Top of battery box
There are four J-bolts. Step 1
washer (2), and
is typical for all four J-bolts.
J-bolt (3)
Do step 1 again.
2.
J-bolts (3)
Remove
Battery hold-
3.
Place hardware in battery box for
down (4)
storage.
INSTALLATION
Using pliers, install.
1. Top of battery box
J-bolt (3),
battery holddown
Hook J-bolt through loop in battery
(4), flat washer
box and slide on battery holddown.
(2) and nut (1)
There are four J-bolts. Step 1 is
typical for all four J-bolts.
Do step 1 again.
J-bolt holes (5)
2.
4-162
