TM 11-7440-284-14
4-59. REMOVING RADIO MOUNTING BASES.
This task covers:
Removal
INITIAL SETUP
Personnel Required
Tools
One mechanic
1/2-inch box wrench
Equipment Condition
Materials/Parts
Radio power cables removed, see
None
ACTION
REMARKS
ITEM
LOCATION
NOTE
There are three radio mounting bases. Steps given are typical
of all three mounting bases.
Using 1/2-inch box wrench, remove.
Radio mounting
1.
Roadside position
There are five nuts. Step 1 is
box (1), nut (2)
of radio mount
typical for all five nuts.
and ET lock-
washer (3)
Do step 1 again.
Nuts (4)
2.
Remove.
Radio mounting
3.
base (1)
Do steps 1, 2 and 3 again.
Radio mounting
Curbside position
4.
base (5)
of radio mount
Do steps 1, 2 and 3 again.
Radio mounting
Curbside corner
5.
base (6)
position of
There are only four nuts used
radio mount
with this radio mount.
See paragraph 4-35 for installation
Radio mounting
6.
bases (1), (5)
and (6)
4-114
