F A N , C L U T C H A S S E M B L Y , P U L L E Y , A N D A I R C O N D I T I O N E R B E LT
If installing air conditioner belt (4), perform steps 9-13.
Install 4 studs (10) and pulley assembly (5).
Install power steering belt (see paragraph 8-15) and alternator belts (see paragraph 4-2 or
4-3). DO NOT tighten belts at this time.
DO NOT repair and reuse a fan (7) with a bent or damaged blade. Replace
fan as an assembly. A damaged fan is out of balance and may fall apart
during use causing serious injury or death to personnel.
Install fan (7) to clutch assembly (8) with 4 screws (6).