T H E R M O S T A T , W A T E R O U T L E T , A N D C R O S S O V E R P I P E H O U S I NG
Install alternator bracket (3) with 2
bolts (4). Install nut (2) onto stud (1).
Install alternator and tighten alternator
belt. (See paragraph 4-2 or 4-3)
Position thermostat assembly (11)
inside crossover pipe (6 or 15).
Install new gasket (8) and water outlet
(10) at crossover pipe (6 or 15) with
2 bolts (9).
Ensure that clamp (20) is installed with hose protector tab at bottom. This
tab prevents damage to radiator inlet hose (19) from alternator belt.
Install radiator inlet hose (19) at water outlet (10) with clamp (20).
Install air cleaner assembly if removed. (See paragraph 3-9)