TM9-2320-289-34P sequence.  The  NIIN  consists  of  the  last  nine digits of the NSN (i.e., 5305-01-674-14 ). When using this column to locate an item, ignore the first 4 dig- its of the NSN. However, the complete NSN should be used when ordering items by stock number. (2) FIG. column. This column lists the number of the figure where the item is identified/located. The fig- ures are in numerical order in Section II and Section Ill. (3) ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG. column. This item is also identified by the NSN listed on the same line. b. PART NUMBER  INDEX.  Part numbers in this index are listed by part number in ascending alphanumeric sequence   (i.e.,   vertical   arrangement   of   letter   and number combination which places the first letter or digit of each group in order A through Z, followed by the numbers O through 9 and each following letter or digit in like  order). (1) CAGEC column. The  Commercial  and  Gov- ernment   Entity   (CAGE)   Code   (C)   is   a   5-digit alphanumeric code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. (2) PART NUMBER column.  Indicates the pri- mary number used by the manufacturer (individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and in- spection requirements to identify an item or range of items. (3) STOCK  NUMBER  column.  This column lists the NSN for the associated part number and manufac- turer  identified  in  the  PART  NUMBER  and  CAGE columns to the left. (4) FIG. column. This column lists the number of the figure where the item is identified/located in Sec- tions II and Ill. (5) ITEM column.  The item number is that num- ber  assigned  to  the  item  as  it  appears  in  the  figure referenced in the adjacent figure number column. c. FIGURE AND ITEM NUMBER INDEX. (1) FIG. column. This column lists the number of the figure where the item is identified/located in Sec- tions II and Ill. (2) ITEM column.  The item number is that num- ber  assigned  to  the  item  as  it  appears  in  the  figure referenced in the adjacent figure number column. (3) STOCK  NUMBER  column.  This column lists the NSN for the item. (4) CAGE  column.  The Commercial and Gov-    ernment  Entity  (CAGE)  is  a  5-digit  alphanumeric  code used to identify the manufacturer, distributor, or Govern- ment agency, etc., that supplies the item. (5) PART NUMBER column.  Indicates the pri- mary number used by the manufacturer (individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards and in- spection requirements to identify an item or range of items. 5.   Special   Information. a. USABLE ON CODE. The usable on code appears in  the  lower  left  corner  of  the  Description  column heading. Usable on codes are shown as “UOC: . . . . . . “ in the Description column (justified Ieft) on the first line following   applicable   item   description/nomenclature. Uncoded   items   are   applicable   to   all   models. Identification of the usable on codes used in the RPSTL are: Code Used  On 194 M08,Type  “B’’Cargo, Shelter 208 M1008A1,Type “B” Cargo, Troop Seat 209 M1009, Type “A” Utility 210 M1010, Type “C” Ambulance 230 M 1028, Type “E” Shelter Carrier 252 M1028A1,Type’’F” Shelter Carrier w/PTO 254 M1028A2, Type “F” Shelter Carrier w/PTO 256 M1028A3, Type “E” Shelter Carrier 231 M1031, Type “D” Chassis b. FABRICATION INSTRUCTIONS. Bulk materials required  to  manufacture  items  are  listed  in  the  Bulk Material Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the Description column  of  the  line  item  entry  for  the  item  to  be manufactured/fabricated. Detailed fabrication instructions for items source coded to be manufactured or fabricated are found in TM 9-2320-289-20 or TM 9- 2320-289-34. c. ASSEMBLY  INSTRUCTIONS.  Detailed  assembly instructions for items source coded to be assembled 4