TM 9-2320-289-34
10-13. CARGO BENCH SEAT REPAIR (ALL EXCEPT M1009 AND M1010).
This task covers:
a. Disassembly
b. Assembly
INITIAL SETUP:
Equipment Condition
MaterialslParts
l Bench seat removed.
l Hog rings (as required)
(See TM 9-2320-289-20)
Too/s/Test Equipment
l Screwdriver bit set, J-29843
l Hog ring pliers
a .
DISASSEMBLY
1 .
Remove 10 screws (6) and 2 trim covers (7) from bench seat assembly (11).
2 .
Remove 2 striker bolts (5), frame catches (4), and flat washers (8) from seatback assembly
(1).
3.
Remove 2 bushings (2) and grommet (3) from each frame catch (4) if worn or damaged.
4.
Remove 2 seatback frame bolts (9) and washers (10) from seatback assembly (1).
5 .
Lift off seatback assembly (1) from bench seat assembly (11).
TA60421
10-46