5-22. TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Cont)

5-22. TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Cont) - TM-9-2320-289-34_533

c. CLEANING AND INSPECTION - TM-9-2320-289-34_535

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
517

TM 9-2320-289-34 5-22. TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Con’t). 30. Remove snapring (92) from front output shaft (88). Remove thrust washer (95) and retainer pin (93) . There are 64 roller bearings Ensure that all are present. NOTE (96) in 2 rows on front output shaft (88). 31. Remove output low sear (94) from front output shaft (88). Remove 64 roller bearings (96) and s p a c e r ( 9 7 ) . 32. Remove 6 bolts (101) and PTO cover (100). If present, remove gasket (99) and discard. 33. Remove 2 seals (98) from shift rail bores and discard. 34. Remove clip, magnet, and 2 Iockpins from bottom of transfer case (1). Discard Iockpins. TA50344 5-173

Privacy Statement
Press Release
Contact