TM 9-2320-289-34
5 - 3 .
VACUUM MODULATOR ASSEMBLY AND FILL TUBE ASSEMBLY
REPLACEMENT (Con’t).
16.
Install modulator valve (4) in transmission (7) bore with stem end out. Install new “O“ ring seal
(3) and vacuum modulator assembly (2) with retainer (5) and bolt (6). Tighten bolt to 20 Ib,-ft.
(27 N.m).
FOLLOW-ON TASKS:
l Install vacuum lines. (See TM 9-2320-289-20)
• Connect both battery negative cables. (See TM 9-2320-289-20)
• Check hydraulic fluid level, (See LO 9-2320-289-12)
Pages 5-13 through 5-15 have been rescinded.
TA701853
5-12
Change 2
