10-19. CARGO COVER AND FRAME MAINTENANCE (M1008 AND M1008A1)

10-18. CARGO BENCH SEAT AND SEATBELT REPLACEMENT (ALL EXCEPT M1009) (Cont)

10-19. CARGO COVER AND FRAME MAINTENANCE (M1008 AND M1008A1) (Cont) - TM-9-2320-289-20_557

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
535

TM 9-2320-289-20 10-19. CARGO COVER AND FRAME MAINTENANCE (M1008 AND M1008A1). This task covers: a. Removal c. Installation b. Repair INITIAL SETUP: Materials/Parts Personnel Required Locknuts (as required) • MOS 63B (2) RTV sealant (Item 41, Appendix C) a. REMOVAL • If removing • If removing 1-13. • If removing • If removing • If removing NOTE cargo cover (1), perform steps 1-5. cargo cover frame assembly components, perform steps front rail assemblies (23), perform steps 1, 3, 14, and 15. rear rail assembly (12), perform steps 3, 4, and 16. side rail assemblies (10), perform steps 1-10, and 17. 1. Inside cargo area, detach cargo cover (1) from all turnbuttons (4). 2. Inside cargo area, remove 4 straps (2) along front and rear roof bows (3). 3. Remove 4 straps (5) from rail assemblies. 4. On outside, detach remaining edges from all turnbuttons (4). 5. Remove cargo cover (1). TA49977 10-60

Privacy Statement
Press Release
Contact