TM 9-2320-289-20
like the design or performance. Put it on an SF 368 (Quality Deficiency Report). Mail it to us at:
Commander, U.S. Army Tank-Automotive Command, ATTN: AMSTA-QRD, Warren, MI 48397-5000.
We’ll send you a reply.
1-7.
WARRANTY INFORMATION.
To determine if your CUCV Series truck is under warranty, see TB 9-2300-295-15/24.
1-8.
METRIC SYSTEM.
The equipment described herein contains metric components and requires the use of metric
tools; therefore, metric units, in addition to standard units, will be used throughout this manual.
Standard units will be given first with the equivalent metric unit in parentheses, for instance: 7000 lb.
(3178 kg). A metric conversion chart is located on the inside back cover of this manual.
1-9.
COMMON TOOLS, SPECIAL TOOLS, AND REPAIR PARTS.
a. For authorized common tools, refer to the Common Table of Allowance (CTA) and the
Modified Table of Organization and Equipment (MTOE) applicable to your unit.
b. For special tools, and Test, Measurement, and Diagnostic Equipment (TMDE), refer to
the Repair Parts and Special Took List (RPSTL) manual, TM 9-2320-289-20P, and the Maintenance
Allocation Chart (MAC) in Appendix B of this manual.
c. Repair parts are listed and illustrated in the Repair Parts and Special Tools List (RPSTL)
manual, TM 9-2320-289-20P.
d. Torque wrenches are normally marked with a measurement term ft. -lb. or in. -lb. T he
terms used within this manual are lb. -ft. or lb. -in., unless otherwise noted in the text.
1-2
Change 1
