10-24, AIR CONDITIONER COMPRESSOR MAINTENANCE (M1010) (Cont).
Install new suction screen (39) and new O ring (33) on rear head (34), Install rear head on
compressor shell (29) with 4 nuts (35),
Install pressure release valve (37) and preformed packing insert (38) on rear head (34). Install
2 new preformed packing inserts (36) on rear head,
Aline coil housing terminals (26) with
marks made on compressor shell
(29) during removal. Aline locating
tabs on coil housing (25) with holes in
front head casting, and install coil
housing, Install coil housing retaining
ring (24) with flat side against coil
Pulley bearing (22) should not be
cleaned with any type of solvent.
Failure to follow this caution may
result in damage to pulley bearing.
Drive pulley bearing (22) into pulley
(23), Install pulley bearing retaining
ring (21 ) in pulley groove.
Install holding fixture (28) in vise,
Install compressor assembly (14) in