3-5. FUEL INJECTOR PIPES AND NOZZLES REMOVAL.
This task covers:
l Intake manifold removed. (See paragraph 3-4)
l Crowfoot attachment, J-29698-A
l Socket wrench adapter, J-29873
l If removing fuel injector pipes (8), perform steps 1-4.
l If removing fuel injector nozzles (6), perform steps 1-3, 5, and 6.
Remove 2 screws (1) and clips (2)
from fuel injector pipe bracket (4) on
one side. Remove clips and inserts
(3) from fuel injector pipes (8).
Discard inserts if damaged. Repeat
step for other side.
Ensure that all openings and
plugged after disconnection to
prevent contamination of fuel
Ensure that fuel injector pipes (8),
fuel injector nozzles (6), and Fuel
tagged for installation.
Disconnect 8 fuel injector pipes (8)
from 8 fuel injector nozzles (6).
Remove 4 nuts (7) and 2 fuel injector
pipe brackets (4) from cylinder head
studs (5) if damaged.