10-12. CAB REAR WINDOW REPLACEMENT (Cont).
Have an assistant stand outside to support window glass (1) and weatherstrip (2) as they are
removed. From inside cab, apply firm, controlled pressure to edge of window glass and assist
lip of weatherstrip channel over flange (4) with a flat-bladed tool. Remove window glass and
weatherstrip. Remove weatherstrip from window glass.
Wear heavy gloves and safety goggles when handling window glass (1) to
avoid risk of injury to personnel.
In event of stress crack or leakage, ensure that weatherstrip (2) and flange
(4) are thoroughly inspected before installing window glass (1). Failure to
follow this caution may result in a recurrence of crack or leakage.
If sheet metal and paint repairs are needed, see FM 43-2,
Inspect flange (4) for high spots or other irregularities. Remove all high spots or irregularities